OSHA Dental & Medical Office Hazards Certification
(5 CMEs)
According to OSHA 3187 Medical & Dental Offices a Guide to Compliance with OSHA Standards; Bloodborne Pathogens (and Needlestick Safety and Prevention), Hazard Communication (Worker Right To Know), Ionizing Radiation, Exit Routes and Electrical are the training requirements that normally apply to medical and dental offices, whether there are two or 200 employees.
We have combined these five online training courses into a cost effective bundle.
Yourself
Select this if you are purchasing this course to take yourself. It will automatically be assigned to you.
Yourself & Others
Select this if you are purchasing more then one of these courses for both yourself and others. One will be assigned to you automatically, and can assign the remainder at any time after you have completed the purchase.
Others
Select this if you are purchasing one or more of this course for others. You can assign them at any time after you have completed the purchase.
Enter the number of persons who will be taking this course.
Governing regulations.
This online course bundle satisfies the training requirements for the following:
OSHA 29 CFR § 1910.1030 Bloodborne Pathogens (and Needlestick Safety and Prevention) Standard;
OSHA 29 CFR § 1910.1200 Hazard Communication Standard (Worker Right To Know);
OSHA 29 CFR § 1910.1096 Ionizing Radiation Standard;
OSHA 29 CFR § 1910 Subpart E & Subpart L Exit Routes & Fire Protection Standard;
OSHA 29 CFR § 1910.301 to 1910.399 Electrical Standard;
Who must take this course?
All persons in Medical and Dental offices where the number of employees is two or greater.
It will take a MINIMUM of 5 hours to complete this online course. The student may log on and off as needed. A bookmark will be set so when they log back in they will return to where they left off.
Upon successful completion each student will have immediate access to a printable OSHA Medical Office Hazards Training certificate and wallet card.
We have no restrictions on how long a person takes to complete a course.
Likewise, if you are purchasing for others, we have no time limit on assigning courses. So you can purchase a larger quantity then you currently need and take advantage of volume discounts.
Each student will receive 0.5 CEUs (or 5 CMEs) from Compliance Training Online™ for completing this course.
Our OSHA Medical Office Hazards Training Bundle course consists of content, graphics, audio, and a final exam.
Our OSHA Medical Office Hazards Training Bundle is comprised of five of our online courses that cover what OSHA has identified as the standards training that apply to most Medical and Dental offices. Each course within the bundle describes their standard, hazards, and various controls that can be used to protect the health and safety of workers.
Specific topics covered in this course bundle include:
- Bloodborne Pathogens (and Needlestick Safety and Prevention)
- what the standard covers,
- what bloodborne pathogens are, including,
- Hepatitis B (HBV)
- HIV
- Hepatitis C
- Other pathogens, such as malaria
- terms,
- exposure hazards and contaminated sharps,
- Exposure Control Plan,
- controls, including:
- engineering/technological solutions
- work practices
- Personal Protective Equipment
- vaccination,
- labeling and training, and
- recordkeeping
- Hazard Communication (aka HazCom and Worker Right To Know)
- what the standard covers,
- what a chemical is and how it can be hazardous,
- Immediately Dangerous to Life and Health (IDLH) hazards,
- terms,
- routes of entry,
- potential ways to be exposed,
- written HazCom program,
- training,
- labeling,
- Material Safety Data Sheets and documentation,
- exposure limits/permits
- other controls, including:
- engineering/technological solutions
- Personal Protective Equipment and monitoring
- Ionizing Radiation
- what the standard covers,
- what radiation is,
- terms,
- ionizing radiation hazards, and
- radiation controls, including:
- restricted/unrestricted areas
- exposure limits
- personal monitoring
- caution signs, labels, and signals
- shipment and storage
- waste disposal
- reporting
- Exit Routes, Emergency Action Plans, Fire Prevention Plans, and Fire Protection
- what the relevant standards cover,
- types of workplace emergencies,
- exit routes,
- Emergency Action Plans,
- Fire Prevention Plans,
- Fire Protection and extinguishing systems, and
- Fire extinguishers.
- Electrical
- what the relevant standards cover,
- types of electrical injuries, including:
- shock
- electrocution
- burns
- falls
- what electricity is and why it can be hazardous,
- terms,
- safety devices:
- Ground Fault Circuit Interrupters (GFCIs),
- Circuit breakers/fuses
- Grounding
- causes of electrical hazards,
- controls, including:
- engineering/technological solutions
- work practices and training
- Personal Protective Equipment
The length of time for which the training is valid is determined by the most restrictive standard, which is OSHA 29 CFR § 1910.1030 Bloodborne Pathogens.
(g)(2)(ii)
Training shall be provided as follows:
(g)(2)(ii)(A)
At the time of initial assignment to tasks where occupational exposure may take place;
(g)(2)(ii)(B)
Within 90 days after the effective date of the standard; and
(g)(2)(ii)(C)
At least annually thereafter.
(g)(2)(iii)
For employees who have received training on bloodborne pathogens in the year preceding the effective date of the standard, only training with respect to the provisions of the standard which were not included need be provided.
(g)(2)(iv)
Annual training for all employees shall be provided within one year of their previous training.
We will automatically notify you when retraining is required.
Other related Compliance Training Online™ courses (see our complete list of courses) include:
