Accessibility Icon
Search icon.Shopping cart icon.

7 Types of Training for Construction Workers

Did you know that about 4,764 fatal injuries occurred in 2020? Besides, more than 2.5 million recordable nonfatal injuries and illnesses got recorded in the same year.

Construction work involves a lot of physical activities that may result in injuries and fatalities.

Most death victims succumb to dangerous falls and encounters with large objects. Others die out of electrocution and collisions.

Thus, it's essential to go through a construction worker training program to help you stay out of danger.

There are various types of construction training. Here we provide you with the seven types of training for construction workers.

1. Excavation and Trenching

Construction workers will learn the disparities between trenches and excavations. Besides, your worker will also understand how to navigate around both.

This training also entails knowing the risks of working in limited spaces. These spaces can include cave-ins and slippery surfaces.

The training program teaches the significance of adequate preplanning. This can include sourcing materials that are OSHA-compliant and assessing safety risks.

Unprotected trenches can make your early grave. Neither employers nor employees would want such a fatal occurrence.

Employers should allow construction workers to enter trenches after considering all safety measures. Construction workers must mind falling loads and harsh atmospheres when working in trenches.

2. OSHA Construction Training

Construction sites need to protect their workers from any safety hazards. Besides, employers are responsible for providing a safe working environment for construction workers.

The OSHA online construction training introduces learners to various inspection requirements. Construction workers learn health and site safety standards that they must always adhere to.

With the OSHA construction chemical hazards training, you learn to reduce safety risks by switching to safer chemicals. You may trap harmful fumes by enclosing processes or using ventilation to clean up the air.

Employers should display posters that describe the rights of a construction worker. Workers must also get trained in languages they can comprehend.

The OSHA training for construction workers teaches how to file a legal complaint. It'll help you file a case if there's non-compliance with the OSHA requirements.

You'll also learn about witness protection measures for your safety.

3. Protection from Falling

Fall protection training is essential for all construction workers. The training helps you safeguard yourself from falling objects, holes, or tripping.

This construction training applies to workers who work at six feet and above heights. If the height is below six feet, fall protection training will apply when working near dangerous machinery.

Such machinery can include open drive belts, pulleys, and gears. You can provide fall protection through a guardrail, safety net, and personal fall arrest systems.

Guardrail system barriers will prevent you from falling to lower levels. It's best to install the safety nets under the walking and working surfaces supporting your construction workers.

You shouldn't install safety nets more than thirty feet below the working surfaces.

4. Rigging Type of Construction Training

Rigging involves moving, placing, and securing a load using manual load shifting machinery.

Throughout the crane, derrick, and hoist safety training, you'll learn to select the right lifting equipment and hitch types. Construction workers can also learn how to communicate with crane operators.

You must keep your fingers, hands, and feet off pitching points. Watch out for the piled materials that may get bumped over with a swinging load.

It’s advisable to have a designated spotter on standby. They can help you confirm the maintenance of proper clearances.

It's also best to warn any passersby before you begin to raise, lower or swing any loaded materials. Construction workers must wear the correct protective gear such as glasses, gloves, and safety boots.

5. Welding Safety Training

Construction workers learn the basics of welding and its safety risks throughout the course. Besides, you learn the best protective measures against the assessed risks.

When brazing, you'll use temperatures above 842 Fahrenheit to make joints and seams with less strength than welding. Soldering produces the strongest joints and seams.

Some welding hazards include electrocution and noise pollution. You can also get exposed to harmful fumes, gases, and burns.

Protective gear is a must to keep you safe from the welding hazards at the construction site.

6. Power Tools Handling Training

Construction workers use different power tools for various functions at a construction site. Without proper training, you can encounter minor and major injuries.

Such injuries include abrasions, blindness, amputations, and unwanted fractures.

This training will help your workers understand the general usage of various power tools. You should inspect your power tools for damages before use.

It's essential to use the right tool for a specific task and have your full PPE when using the power tools. After completing your tasks, you must always unplug your tools from the power connection.

7. Personal Protective Equipment (PPE) Training

Safety risks can occur at any construction site. Construction workers not only need protective equipment. As the employer, you must provide proper training on using the different protective gear.

Personal protective equipment reduces your exposure to safety hazards that can injure or kill you.

You should have hard hats at all times for your head protection. Shaded lenses will safeguard your eyes from harmful light when welding.

Face shields will protect you when grinding, torch cutting, and chipping. You should wear safety boots made from hard leather.

Your boots must cover your ankle and have a sizeable heel. Wear your safety boots properly and lace up.

Construction Workers Safety

If you get injured at the construction site, report the case to your supervisor. Your supervisor may organize for first aid to make you feel better.

If the injury is severe, they will call for your immediate medical help.

You should take photos of your injuries and any machinery involved in the scene. Call your injury lawyer to help you fill out the compensation form before submitting it to the supervisor.

Contact us to learn more types of training for construction workers.

THE BEST ONLINE TRAINING EXPERIENCE POSSIBLE

Fast

Your time is valuable. We've designed our site to be as fast as possible.

Easy to use

You'll never get lost or confused with us.

Immediate Access

There's no waiting period. Begin the course as soon as you sign up.

Anywhere Anytime

Internet connection and a computer, tablet, or smartphone.

Up to date

We update our courses as soon as new regulations come out.