Accessibility Icon
Search icon.Shopping cart icon.
BBB accredited business. A plus rating.
Trustpilot 4.6 star rating.
Catalog > Construction > Slips, Trips & Falls

Construction Slips, Trips & Falls

Online Training Certification Course

29 CFR 1926

From the highest rated and most trusted online training company - since 2008.

The construction industry is an inherently hazardous environment, and many workers are injured annually due to walking and working surfaces accidents. Construction work often involves working around unprotected edges and unguarded openings, which are dangerous in the event of a slip, trip, or fall.

Slips, trips, and falls training is critical to minimize the effects of these hazards. This course presents an overview of the risks associated with construction walking-working surfaces. It covers industry safety standards, applicable regulations, responsibilities in the workplace, and hazard control measures to prevent slips, trips, and falls.

This course is for:
This construction slips, trips, and falls training is designed for all members of the construction workforce, including contractors, subcontractors, employees, managers, and supervisors. This safety training may help prevent serious injury in the workplace and save lives.

This online certification course meets the requirements set forth by OSHA for walking-working surfaces in the construction industry, including slip, trip, and fall hazards.

Available languages: 100+ languages - translation provided by Google Translate (Select Language bottom of page)

Case Study: A construction superintendent fell 33 feet to his death while constructing an elevator shaft. He was setting up a work platform using plywood set on top of some boards that were nailed to the frame of the elevator shaft. When the victim stepped onto the plywood platform, one of the boards broke. This caused the platform to give, and the victim fell to the concrete floor below.

Key Takeaway: The worker should have been provided with appropriate fall protection equipment. In addition, before work began, the working surface should have been inspected to make sure that it had sufficient structural strength to support the worker, and the elevator shaft hole should have been sufficiently covered.

Take This Course
$39.95 per student
(1-3)
$35.95 per student
(4-7)
$32.95 per student
(8-12)
$30.95 per student
(13-20)
$29.95 per student
(21+)
Need it SCORM compliant?
  • Up to date
  • Fast
  • Easy To Use
  • Immediate Access
  • Anywhere Anytime
  • All Devices
  • Audio
  • Case Studies
  • Self-check Questions
  • Printable certificate and wallet card awarded upon successful completion

Payment Methods Accepted

American ExpressDiscover CardJCBMasterCardVISA

Governing Regulations

The Occupational Safety and Health Act of 1970 created the Occupational Safety and Health Administration (OSHA). OSHA, an agency of the U.S. Department of Labor, is charged with the enforcement of safety and health conditions of workers through the use of regulations published in the Code of Federal Regulations. OSHA regulations are published in Title 29 of the Code of Federal Regulations. Part 1926 is designated for construction industry standards. OSHA walking-working surfaces regulations are detailed in 1926 Subpart C - General Safety and Health Provisions; 1926 Subpart L - Scaffolds; 1926 Subpart M - Fall Protection; and 1926 Subpart X - Stairways and Ladders.

What You'll Learn

    Introduction to Walking-Working Surfaces-Construction
  • The Importance of Workplace Safety
  • OSHA Regulations
    Training and Responsibilities
  • Employer Responsibilities
  • Employee Responsibilities
    General Slip, Trip, and Fall Hazards
  • Causes of Slips, Trips, and Falls
  • Risk Factors That Increase Slips, Trips, and Falls
  • Slip, Trip, and Fall Injuries
  • General Requirements
    Floor Openings and Holes
  • Key Terms
  • Floor and Wall Openings and Holes Hazard Prevention
  • Fall Protection
  • Guardrails
  • Safety Nets
  • Personal Fall Protection Systems
  • Personal Fall Protection Equipment Terms
  • Horizontal Lifelines
    Stairs, Ladders, and Scaffolds
  • Stairs
  • Stairway Safety Requirements-Fixed Stairways
  • Stair Rails
  • Handrails
  • Rise
  • Stairway Safety Requirements-Stairways Used During Construction
  • Temporary Stairs
  • Stairway Safety Practices and Guidelines
  • Ladders
  • Fixed Ladders
  • Long Fixed Ladders
  • Portable Ladders
  • Stepladders
  • Straight Ladders
  • Extension Ladders
  • Job-made Wooden Ladders
  • Ladder Set-up
  • Ladder Safety Best Practices
  • Scaffolds
  • Platforms
  • Scaffold Access
  • Fall Protection
    Safe Work Practices
  • Risk Identification
  • Risk Control
    Summary
    Additional Resources
    Exam

It will take a MINIMUM of 2 hours to complete this online course. The student may log on and off as needed. A bookmark will be set so when they log back in they will return to where they left off.

We have no restrictions on how long a person takes to complete a course. Likewise, if you are purchasing for others, we have no time limit on assigning courses. So you can purchase a larger quantity than you currently need and take advantage of volume discounts.

Employers are responsible for training new personnel before assigning them to tasks that may expose them to hazards such as construction walking-working surfaces.

To ensure compliance with OSHA slips, trips, and falls regulations, safety training must be conducted whenever necessary to keep the worksite free from recognized hazards. This slip, trip, and fall training meets these training requirements.

Each student will receive 0.2 CEUs (or 2 CMEs) from Compliance Training Online® for completing this course.

THE BEST ONLINE TRAINING EXPERIENCE POSSIBLE

Fast

Your time is valuable. We've designed our site to be as fast as possible.

Easy to use

You'll never get lost or confused with us.

Immediate Access

There's no waiting period. Begin the course as soon as you sign up.

Anywhere Anytime

Internet connection and a computer, tablet, or smartphone.

Up to date

We update our courses as soon as new regulations come out.