Select this if you are purchasing this course to take yourself. It will automatically be assigned to you.
Yourself & Others
Select this if you are purchasing more then one of these courses for both yourself and others. One will be assigned to you automatically, and can assign the remainder at any time after you have completed the purchase.
Select this if you are purchasing one or more of this course for others. You can assign them at any time after you have completed the purchase.
Enter the number of persons who will be taking this course.
This online course satisfies the training requirements for the OSHA 29 CFR § 1910 Subpart D Walking Working Surfaces Standard regulations.
Who must take this course?
According to OSHA Safety and Health Topics Walking/Working Surfaces all employees working at a permanent place of employment - except where only domestic, mining, or agricultural work is performed.
Other Frequently Asked Questions
It will take a MINIMUM of 2 hours to complete this online course. The student may log on and off as needed. A bookmark will be set so when they log back in they will return to where they left off.
Upon successful completion each student will have immediate access to a printable OSHA Regulations Slips, Trips & Falls Walking Working Surfaces training certificate and wallet card.
We have no restrictions on how long a person takes to complete a course.
Likewise, if you are purchasing for others, we have no time limit on assigning courses. So you can purchase a larger quantity then you currently need and take advantage of volume discounts.
Each student will receive 0.2 CEUs (or 2 CMEs) from Compliance Training Online® for completing this course.
Our OSHA Slips, Trips & Falls Walking Working Surfaces General Industry training course consists of content, graphics, audio, self-check questions, and a final exam.
This course presents an overview of Walking Working Surfaces (General Industry). This course will discuss how to create a safe workplace environment by identifying workplace hazards, such as cluttered aisles, slippery floors, and unsafe stairs. This course will also provide tips on how to eliminate these hazards.
Specific topics covered in this course include:
- About This Course
- Course Objectives
- Introduction to Walking Working Surfaces (General Industry) Safety
- OSHA Regulations
- Walking Working Surfaces Regulations
- General Requirements
- Key Terms
- The Importance of Workplace Safety
- Safety Improves Quality
- Costs of Slips, Trips, and Falls
- Training and Responsibilities
- Employer Responsibilities
- Employee Responsibilities
- Slip, Trip, and Fall Hazards
- Risk Factors That Increase Slips, Trips, and Falls
- Injuries Resulting from Slips, Trips, and Falls
- Stairway Regulations
- Stair Rails
- Stairway Handrails
- Stairway Rise
- Portable Ladders
- Types of Portable Ladders
- Portable Ladder Best Practices
- Fixed Ladders (1910.27)
- Scaffolding Regulations (1910.28)
- Floor and Wall Holes
- Safe Work Practices
- Risk Identification
- Risk Control
- Additional Resources
OSHA has not specified any time frame for required retraining or recertification for Slips, Trips & Falls Walking Working Surfaces General Industry. Since there is no OSHA standard dealing with this specific hazard the OSH Act general duty clause, section 5(a)(1), 29 U.S.C. 654(b)(1) defines the standard which provides that:
(a) Each employer -
(1) shall furnish to each of his employees employment and a place of employment which are free from recognized hazards that are causing or are likely to cause death or serious physical harm to his employees.
A recognized hazard is a danger recognized by the employer's industry or industry in general, by the employer, or by common sense. The general duty clause does not apply if there is an OSHA standard dealing with the hazard, unless the employer knows that the standard does not adequately address the hazard.
Other related Compliance Training Online® courses (see our complete list of courses) include:
- OSHA Aerial Boom Lift Safety
- OSHA Ammonia Refrigeration
- Arc Flash Safety
- OSHA Bloodborne Pathogens
- OSHA Bloodborne Pathogens for Tattoo Artists & Body Piercers
- OSHA Industry Chemical Hazards & Toxic Substances
- OSHA Cold Stress & Injury Safety
- OSHA Confined Space Entry
- OSHA Confined Space Competent Person/Supervisor
- OSHA Cranes, Derricks & Hoists
- OSHA Crude Oil Hazards
- OSHA Dipping, Coating, and Cleaning Operations Training
- OSHA Water Safety, Drowning, Hazards
- OSHA Electrical Safety
- OSHA Exit Routes, Emergency Action Plans, Fire Prevention Plans, & Fire Protection
- OSHA Eye & Face Protection
- Firefighter Confined Space Entry
- OSHA General & Maritime Silica Safety
- OSHA Fork Lift Training
- OSHA Hand & Power Tool Safety (General Industry)
- OSHA GHS Hazard Communication (Right to Know)
- OSHA Hearing Conservation & Protection
- OSHA Heat Stress & Illness Safety
- OSHA Hot Work General Industry
- OSHA Ionizing Radiation Safety
- OSHA Labor & Industry Ergonomics
- OSHA Ladder & Stairway Safety
- OSHA Laser Safety
- Industrial Laser Safety Officer
- OSHA Lockout Tagout
- OSHA Machine Guarding
- OSHA Mold Abatement, Remediation & Removal
- OSHA Office Ergonomics
- OSHA Oil and Gas Extraction
- OSHA Oil Spill Cleanup Hazards Overview
- OSHA Outdoor Biological Hazards
- OSHA Personal Protective Equipment
- OSHA Fire Extinguisher Training
- OSHA Respiratory Protection
- OSHA Scissor Lift Safety
- OSHA Trenching & Excavation Safety
- Workplace First Aid