NFPA 70E 2027: Standard for Electrical Safety in the Workplace
Online Training Certificate Course
Online NFPA 70E training built on the 2027 edition, covering arc flash, shock protection, and safe work practices.
- Electrical Safety Awareness-Level Training
- Updated NFPA 70E Safety Practices
- Supports 3-Year Retraining Requirements
- Instant Certificate of Completion
This course is offered by 360training®. Compliance Training Online™ is a division of 360training®.
This 4-hour, self-paced online course is based on the 2027 edition of NFPA 70E, Standard for Electrical Safety in the Workplace®. It covers electrical safety-related work practices, hazard identification and risk assessment, and requirements for special electrical equipment. Interactive activities and workplace scenarios help you apply key concepts as you move through the course. Designed as an awareness-level overview of NFPA 70E, this course does not provide qualified electrical worker certification.
This course is designed for employees, supervisors, and employers whose work involves electrical equipment or who may be exposed to electrical hazards while performing their assigned duties. Job titles and training needs vary by workplace. Employers are responsible for determining the training employees need based on their assigned tasks, equipment, and potential exposure to electrical hazards.
Governing Regulations
The Occupational Safety and Health Act of 1970 created the Occupational Safety and Health Administration (OSHA), an agency of the U.S. Department of Labor responsible for enforcing workplace safety and health standards. OSHA regulations are published in Title 29 of the Code of Federal Regulations (CFR), with Part 1910 covering general industry. Electrical safety requirements for general industry include those found in 29 CFR Part 1910, Subpart S.
OSHA's electrical standards address requirements for electrical systems and electrical safety-related work practices. NFPA standards also play an important role in electrical safety. NFPA 70, the National Electrical Code® (NEC®), addresses electrical installations, while NFPA 70E®, Standard for Electrical Safety in the Workplace®, addresses electrical safety-related work practices and other measures intended to protect employees from electrical hazards. NFPA 70E can help employers understand and address electrical hazards, but its requirements should not be described as OSHA regulations.
What You'll Learn
Course Topics
Lesson 1: Introduction to NFPA 70E
- Introduction to NFPA 70E
- NFPA and OSHA
- What's New in the 2027 Edition
- Importance of NFPA 70E
- Importance of Electrical Safety
- NFPA 70E Annexes
Lesson 2: Chapter 1 Safety-Related Work Practices
- Safety-related work practices
- General electrical safety requirements
- Application of electrical safety-related work practices
- General requirements for electrical safety-related work
- Making your working conditions electrically safe
- Work involving electrical hazards
Lesson 3: Chapter 2 Safety-Related Maintenance Requirements
- General Maintenance Requirements
- Substations, Switchgear Assemblies, Switchboards, Panelboards, Motor Control Centers, and Disconnect Switches
- Premises Wiring
- Controller Equipment
- Fuses and Circuit Breakers
- Rotating Equipment
- Hazardous (Classified) Locations
- Batteries and Battery Rooms
- Portable Electric Tools and Equipment
- Personal Safety and Protective Equipment
Lesson 4: Chapter 3 Safety Requirements for Special Equipment
- Introduction
- Direct Current Electrical Hazards
- Capacitor Electrical Hazards
- Electrical Hazards from 1 Hz to 110 MHz
- Safety-Related Work Practices for Electrolytic Cells
- Safety Requirements Related to Batteries
- Safety-Related Work Practices for Electrical Double Layer Capacitors
- Safety-Related Work Practices for Photovoltaic Systems
- Safety-Related Work Requirements: Research and Development Laboratories
Course Objectives
By the end of this course, learners will be able to:
- Describe the relationship between OSHA and NFPA 70E.
- Explain the purpose and organization of NFPA 70E.
- Identify common electrical hazards and describe the principles of hazard identification, risk assessment, and risk control.
- Explain the requirements for establishing and verifying an electrically safe work condition.
- Describe safe work practices for employees who may be exposed to electrical hazards.
- Describe the requirements for electrical hazard analyses, shock protection boundaries, and arc flash boundaries.
- Describe the selection and use of personal protective equipment (PPE).
- Identify safety-related maintenance requirements that support electrical safety.
- Describe the safety requirements applicable to the special equipment addressed by NFPA 70E, including direct current (dc) systems, batteries, Electrical Double Layer Capacitors (EDLCs), photovoltaic systems, and research and development laboratories.
NFPA 70E is the national standard for electrical safety in the workplace, and the 2027 edition is the version currently in effect. It replaces the 2024 edition.
A few things changed with this edition. Certain energized work now requires an additional trained person on site, beyond the qualified person doing the task. Verifying that arc-rated PPE actually meets the standard got stricter, since a supplier's Declaration of Conformity alone is no longer enough. Requirements for direct current equipment and battery systems expanded, and a new article covers electrical double layer capacitors (EDLCs) for the first time.
NFPA 70E caps retraining at three years for safety-related work practices. That interval happens to line up with the standard's own three-year revision cycle, which is why a new edition often arrives around the same time workers are due for retraining anyway. The new edition itself doesn't reset that clock. What does trigger earlier retraining is a specific event: new equipment, a change in job duties, or an inspection that turns up unsafe practices.
If your team already trained under the prior edition, our NFPA 70E 2024 course remains available while you review whether the 2027 changes affect your program.
Important Information About NFPA 70E References
This course explains the practical application of the requirements contained in NFPA 70E, Standard for Electrical Safety in the Workplace®. It is intended to support learning and workplace compliance but does not replace the official NFPA 70E standard.
To respect copyright restrictions, this course does not reproduce all tables, figures, or explanatory notes from the standard. Where appropriate, references are provided to specific NFPA 70E sections and tables. Learners and employers should consult the current edition of NFPA 70E for the complete regulatory text, tables, figures, and additional guidance.
If you do not have access to the current edition of NFPA 70E, consider obtaining a licensed copy from the National Fire Protection Association (NFPA) or through your employer's safety program.
This course serves three groups of workers, depending on how directly their job brings them into contact with energized equipment:
- Qualified persons: electricians, technicians, and contractors who work on or near energized equipment. Qualified person status comes from your employer, not from this course. This course provides the knowledge portion, covering hazard recognition, risk assessment, and PPE selection, while your employer provides hands-on training on your specific equipment.
- Unqualified persons: facility maintenance staff, plant maintenance workers, HVAC technicians, laborers, and operators who work near electrical hazards without performing electrical work themselves.
- Supervisors and safety professionals: EHS managers, safety coordinators, and site supervisors who oversee electrical work or apply NFPA 70E requirements across their team.
The course starts by explaining how OSHA's electrical safety rules relate to NFPA 70E. From there, it covers safety-related work practices, safety-related maintenance requirements, and special equipment named directly in the standard: direct current systems, capacitors, batteries, EDLCs, photovoltaic systems, electrolytic cells, and research and development laboratories. Along the way, scenario-based decision activities let you apply what you're learning to realistic workplace situations. For training on other workplace safety requirements and hazards, explore our OSHA-aligned training courses.