CONTACT
Cal/OSHA Electrical Safety
Online Training Certificate Course
Title 8 CCR, Section 2299–2599 & 2700–2989
From the highest rated and most trusted online training company - since 2008.
This online certification course presents an overview of the State of California regulations for work around low-voltage and high-voltage electrical installations. The course covers the Cal/OSHA Electrical Safety Orders (ESOs) outlined in Title 8 of the Code of California Regulations; hazards of working near or around electricity; and employer and employee responsibilities for ensuring a safe workplace.
Working with electricity is almost unavoidable, and the hazards of electrical shock are well documented. Still, exposure to electricity remains a major hazard on the job. Depending on the amount of electrical current and the length of time the current is present in the body, electrical shock can result in injury or death. Anyone who works with electricity on the job needs to understand and follow applicable safety regulations.
This course is for:
In nearly every occupation, workers are exposed to electrical energy as they complete their job duties. Any employee exposed to hazardous electricity needs adequate electrical safety training. This electrical safety training online course meets these requirements.
Case Study: A team was installing electrical equipment at a food-processing plant. The equipment was energized while workers took measurements for the new installation. One worker was waiting to retrieve fish tape that was being threaded through new conduit. The tape contacted an activated bus bar, causing an arc flash. The worker received severe third-degree burns to his face and hands.
Key Takeaways: Always de-energize an area before working near or installing equipment. The victim was not wearing the proper PPE for the task at hand. Rather than wearing the recommended full-face shield, rubberized gloves, and flame-retardant outerwear, the victim was wearing only a pair of safety glasses.
Available languages: 100+ languages - translation provided by Google Translate (Select Language bottom of page)
Governing Regulations
California's Division of Occupational Safety and Health (DOSH), more commonly known as Cal/OSHA, sets and enforces standards pertaining to electrical safety. Regulations regarding electrical training can be found in Title 8 of California's Code of Regulations (CCR) in Subchapter 5. These regulations are broken down further into Low-Voltage Electrical Safety Orders found in Subsections 2299-2599 and High-Voltage Electrical Safety Orders found in Subsections 2700-2989.
What You'll Learn
Introduction to Electrical Safety Regulations
- Electrical Safety Regulations
- Cal/OSHA Safety Orders
- NFPA 70E
- Key Terms
The Importance of Electrical Safety
- Who Is At Risk for Electrical Accidents?
- General Employer Responsibilities
- Employee Responsibilities
Electrical Hazards
- Effects of Electrical Current
- Electrical Shock Hazard
- Physical Reactions to Electrical Shock
- Fall Hazard
- Electrical Burn Hazard
- Arc Flash Hazard
- "People" Hazards
Cal/OSHA Low-Voltage Electrical Safety Orders
- Low-Voltage Electrical Safety Orders (ESO-LV)
- Who May Perform Electrical Work
- Work on Energized Equipment or Systems
- Making Connections
- Minimum Approach Distance
- Work on De-Energized Equipment or Systems
- Re-Energizing of Equipment or Systems
- Safety Precautions
- Safety Precautions (Fall Protection)
- New Protection Requirements for Flames and Electrical Arcs
- Working Space
- Hazard Assessment for Flames and Electrical Arcs
- PPE/Apparel for Flames and Electrical Arcs
- Exceptions Based on Arc Ratings
- Further Regulations Related to PPE for Flames and Arcs
Electrical Installation Requirements
- Working Space
- Marking and Identification
Grounding
- Branch Circuits and Receptacles
- Outlet Devices
- Outdoor Wiring and Services
- Overcurrent Protection and Circuit Breakers
- General and Temporary Wiring
- Open Wiring
- Cabinets, Boxes, and Fittings
- Switches and Switchboards
Further ESO-LV Requirements
- Flexible Cords and Cables
- Motors and Disconnections
- Hazardous Locations
- Specialized Regulations
Cal/OSHA High-Voltage Electrical Safety Orders
- General Regulations
- General Regulations - Testing or Determining Voltage
- Minimum Approach Distance
- Types of Insulation
- Tools and Protective Equipment
- Fall Protection
- Line Tools
- Testing Live Line Tools
- Hand Tools and Pneumatic Tools
- Service and Service Entrance Equipment
Further ESO-HV Requirements
- Feeders and Branch Circuits
- Wiring
Conduits
- Continuous Rigid Cable Supports
- Suspension of Cables
- Enclosures for Electrical Installations
Conductors, De-energizing, and Clearance
- Other Elements of High-Voltage Installations
- Regulations for Special Situations and Locations
- Outdoor Wiring
- Working near Overhead Lines
- Work Around High-Voltage Lines
- Communication with Employees
- De-energizing Lines and Equipment
- Clearance Requirements
- Re-energizing Lines and Equipment
- Grounding
- Protective Grounding Equipment
- Connecting and Removing Grounds
- Specialized Regulations
Summary
Additional Resources
Exam
Our online courses will take at least 2 hours to complete, including the final exam, unless a different timeframe is specified in the course details. The learner may log on and off as needed. When they log back in, the course will return to where they left off.
Unless otherwise indicated in the course details, learners have 60 days from the date of enrollment to complete the course. During this time, participants can log out and back in to return to where they left off in the course. The only exception is the final exam, which must be completed in a single sitting.
Learners who do not complete the course within 60 days will have their enrollment disabled and not be eligible for a refund. Please review our Terms & Conditions for details.
According to California OSHA, retraining must be provided when there is a change in working conditions or when the employer observes a need for employee re-education. This online certification meets these training requirements.
Cal/OSHA Confined Space Entry
This online course provides basic safety training to help you understand the risk factors associated with confined spaces, with case studies...
Cal/OSHA Bloodborne Pathogens
The goal of this course is to help you understand the risks involved in working in situations where exposure is possible, and the safety...
Asbestos Awareness Online Training - Cal/OSHA
In order to ensure a safe work environment, every employee has a right to know about asbestos- containing materials that he or she might...
