CONTACT
Fire Safety and Prevention Online Training
Online Training Certificate Course
29 CFR 1926 Subpart F
From the highest rated and most trusted online training company - since 2008.
This course is offered in partnership with Hard Hat Training, a 360training™ company.
This fire safety training course details how to plan for a potential fire, how to prevent fires from happening, and how to respond if a fire breaks out. Course topics include applicable regulations, the necessary equipment to fight fires, extinguishing systems, storage standards, and risk assessment procedures.
Fire prevention and fire protection training are critical elements of a safe workplace. Emphasizing both prevention and protection ensures that all personnel understand how to protect against and prevent fires. This helps reduce the risk of injuries or fatalities caused by workplace fires and explosions.
This course is in partnership with Hard Hat Training. Hard Hat Training and Compliance Training Online™ are divisions of the 360training™.
This course is for:
This fire protection training online course instructs all employers and employees on how to control fire hazards and what to do should a fire occur in the workplace. This safety training may help prevent serious injury in the workplace and save lives.
This online certification course meets the requirements set forth by OSHA, for fire protection and prevention safety training.
Case Study: In 1991, a fire broke out in a Hamlet, North Carolina, Imperial Food Products plant when a fryer ignited. The flames spread by way of the grease left on the building's floors. The building's sprinkler system failed leaving employees to struggle through billowing smoke in order to find the exits, only to find some of them locked. Overcome by carbon monoxide, the employees collapsed, their bodies in piles on the factory floor. Of the 81 employees present that day, 25 died and 40 were injured. Eighty years after the United States vowed to protect its workers after the horrific Triangle Shirtwaist Factory fire, the nation was left asking itself again, "How could something so tragic happen?" A 2017 book by Temple University professor Bryant Simon titled The Hamlet Fire: The Story of Cheap Food, Cheap Government, and Cheap Lives examines this question. Simon agrees that locked doors and lack of safety drills contributed to the loss of life. However, he suggests that much more was at work to cause such a tragedy: a lack of enforcement of regulations, the demand for cheap labor, a "culture of silence and intimidation" from workers and management, and a general trend in the United States of devaluing workers and their safety.
Key Takeaway: No worksite is immune from fire hazards. Implement and follow the safety policies set forth by OSHA.
Available languages: 100+ languages - translation provided by Google Translate (Select Language bottom of page)
Governing Regulations
The Occupational Safety and Health Act of 1970 created the Occupational Safety and Health Administration (OSHA). OSHA, an agency of the U.S. Department of Labor, is charged with the enforcement of safety and health conditions of workers through the use of regulations published in the Code of Federal Regulations. OSHA regulations are published in Title 29 of the Code of Federal Regulations. Part 1910 addresses general industry standards, while Part 1926 is designated for construction industry standards. Fire protection and prevention are addressed in 29 CFR 1926 Subpart F, as well as subparts of 29 CFR 1910.
What You'll Learn
Introduction to OSHA Construction Fall Protection Safety
- OSHA Regulations
- Applicable Parties
- Key Terms
- OSHA Regulations
Introduction to Fire Protection and Prevention Safety Training
- Regulations
- Definitions and Key Terms
- Flammable vs. Combustible Liquids
- Fire Classifications
- Classifications of Firefighters
- Employer Responsibilities
Fire Prevention
- Ignition Hazards
- Class A Combustibles
- Class B Combustibles
- Electrical Hazards
- Welding and Open Flame Work
- Portable Heaters and Other Temporary Heating Devices
- Office Fire Hazards
- Smoking
- General Housekeeping
- Fire Prevention Plans
- Emergency Action Plan
- Components of an Emergency Action Plan
Fire Protection
- General Fire Protection Requirements
- Alarms
- Sprinkler Systems
- Standpipes
- Fixed Extinguishing Systems
- Fixed Extinguishing System Use, Maintenance, and Testing
- Training for Fixed Extinguishing System
- Temporary Buildings Fire Safety
- Outdoor Storage Fire Safety
- Indoor and Outdoor Storage Fire Safety
- Portable Equipment
- Fire Hoses and Connections
- Fire Extinguisher Basics
- Fire Extinguisher Classifications
- Air-Pressurized Water Extinguishers
- CO2 or Dry Chemical Carbon Dioxide Fire Extinguishers
- Multi-Purpose Dry Chemical Fire Extinguishers
- Class K Dry and Wet Chemical Extinguishers
- Reading a Fire Extinguisher Label
- Fire Extinguisher Regulations
- Using a Fire Extinguisher
Additional Storage Standards (Flammable Liquids and Liquified Petroleum Gas)
- Flammable Liquid Flashpoints
- General Requirements for Indoor Storage of Flammable Liquids
- Indoor Storage of Flammable Liquids
- Outdoor Storage of Flammable Liquids
- Liquid Petroleum (LP) Gases
Fire Response
- Reporting Emergencies
- Alarms
- Risk Assessment for Fire Extinguisher Use
- When to Stay
- When to Evacuate
- Exit Routes
- Employee Training and Rights
Summary
Additional Resources
Exam
Our online courses will take at least 2 hours to complete, including the final exam, unless a different timeframe is specified in the course details. The learner may log on and off as needed. When they log back in, the course will return to where they left off.
Unless otherwise indicated in the course details, learners have 60 days from the date of enrollment to complete the course. During this time, participants can log out and back in to return to where they left off in the course. The only exception is the final exam, which must be completed in a single sitting.
Learners who do not complete the course within 60 days will have their enrollment disabled and not be eligible for a refund. Please review our Terms & Conditions for details.
Employers are responsible for training new personnel before assigning them to tasks that may expose them to hazards such as fires in the workplace.
To ensure compliance with OSHA 29 CFR 1926.21 standards regarding fire safety, safety training must be conducted frequently enough to verify that employees are knowledgeable and skilled to plan for a potential fire, prevent fires from happening, and take response steps when a fire breaks out. This fire protection and fire prevention training course meets these training requirements.
NFPA 70E (2024): Standard for Electrical Safety in the Workplace
This course presents an overview of measures to reduce hazards presented by arc flash events. It will cover basic electrical concepts, circumstances that can present the risk of arc flashes...
Confined Space Training Online | OSHA-Aligned
Meet OSHA safety standards with our confined space training. Learn regulations for entrants, attendants & supervisors. Enroll now!
Sit Down Forklift Online Safety Training
This course will familiarize you with the regulations, responsibilities, and best practices as outlined in the CFR1910.178(a) requirements for forklift operators and forklift maintenance.
