CONTACT
Motor Vehicles, Mechanized Equipment, & Marine Operations Safety
Online Training Certificate Course
29 CFR 1926 Subpart O
From the highest rated and most trusted online training company since 2008.
This course presents an overview of motor vehicles, mechanized equipment, and marine operations safety training. This course will help you understand regulations governing motor vehicles and mechanized equipment, including material-handling equipment, pile-driving equipment, and barges. Such equipment poses a serious threat to operator, worker, and site safety. Everyone at a worksite needs to understand the dangers related to the site's equipment. Employees also need to understand the required and recommended employer training and policies necessary to ensure safety at workplaces that large equipment. These efforts will improve site safety and reduce job-related injuries.
This course is for:
Motor vehicles and mechanized equipment pose a serious threat to operators, workers, and site safety. It is critical that everyone on the worksite understands the dangers related to motorized machinery and be trained to identify and handle such hazards. These efforts will improve site safety and reduce job-related injuries and fatalities.
Case Study: Drugs and Alcohol in Fatal Work Crashes
The National Transportation Safety Board (NTSB) published a study titled "Fatigue, Alcohol, Other Drugs, and Medical Factors in Fatal-to-the-Driver Heavy Truck Crashes."
According to NTSB's toxicology reports:
- 33 percent of drivers who were fatally injured tested positive for alcohol or drugs
- Fatigue and fatigue-drug interactions were involved in more fatalities than alcohol and other drugs of abuse alone
- A disproportionately high percentage of drivers who used drugs are single, separated, or divorced
Key Takeaway: Driving while "under the influence" contributed to one-third of fatal injuries in this study. However, drugs and alcohol are not the only factors that can lead to fatal vehicle-related injuries: Fatigue also plays a key role in many accidents. How can your workplace promote safe, sober, and non-drowsy driving? Consider this and your role in workplace safety. By setting a good example yourself, you are contributing to a healthier workplace.
Available languages: 100+ languages - translation provided by Google Translate (Select Language bottom of page)
Governing Regulations
The Occupational Safety and Health Act of 1970 created the Occupational Safety and Health Administration (OSHA). OSHA, an agency of the U.S. Department of Labor, is charged with the enforcement of safety and health conditions of workers through the use of regulations published in the Code of Federal Regulations. OSHA regulations are published in Title 29 of the Code of Federal Regulations. Part 1910 covers general industry regulations, while 1926 is designated for construction industry standards.
This online certification course is based on the regulations set forth in OSHA 29 CFR 1926 Subpart H, as well as OSHA 29 CFR 1910 Subpart N. Both subparts address safety standards for construction and general industry related to materials handling, storage, use, and disposal.
What You'll Learn
Introduction to Motor Vehicles, Mechanized Equipment, and Marine Operations Safety Training
- Common Hazards Related to Motor Vehicles in the Workplace
- NIOSH's Recommendations for Preventing Vehicle-Related Worker Fatalities
Equipment
- Types of Equipment
- General Safety Requirements
- Parking
- Tire Change Safety
- Power Line Safety
- Prior to Working Near Power Lines
- Minimum Clearances
- Crane Equipment
Motor Vehicles
- General Equipment Requirements
- Visibility
- Haulage Vehicles
- Vehicle Inspections
Material-Handling Equipment
- Types of Earthmoving Equipment
- Equipment Requirements
- Access Roadways and Grades
- Seatbelts
- Rollover Protective Structures (ROPS)
- Alarms
- Fenders
- Specific Effective Dates and Regulations Regarding Brakes and Fenders
- Excavating Equipment Requirements
- Lifting and Hauling Equipment Requirements
- Powered Industrial Truck Operator Training
- Additional Earthmoving Equipment Requirements
Pile-Driving Equipment
- General Pile-Driving Equipment Requirements
- Specific Pile-Driving Operating Safety Requirements
Marine Operations
- General Requirements for Longshoring Operations
- Barges
- Access to Barges
- Working Surface Safety on Barges
- First-Aid Equipment on Barges
- Emergency Equipment on Barges
- Diving on Barges
Additional Safety Measures and Information
- Site-Clearing General Requirements
- Employer Responsibilities
- Employee Rights
- Whistleblower Protection
Summary
Additional Resources
Exam
Our online courses will take at least 2 hours to complete, including the final exam, unless a different timeframe is specified in the course details. The learner may log on and off as needed. When they log back in, the course will return to where they left off.
Unless otherwise indicated in the course details, learners have 60 days from the date of enrollment to complete the course. During this time, participants can log out and back in to return to where they left off in the course. The only exception is the final exam, which must be completed in a single sitting.
Learners who do not complete the course within 60 days will have their enrollment disabled and not be eligible for a refund. Please review our Terms & Conditions for details.
OSHA has not specified any time frame for required retraining or recertification for Motor Vehicles, Mechanized Equipment, and Marine Operations Safety Training. Although, as there are several mentioned OSHA regulation standards - there may be additional required training or re-training that this course does not satisfy.
Chemical Hazards & Toxic Substances (Shipyard)
This online course presents an overview of chemical hazards and toxic substances that are commonly used in the maritime and shipyard industry. The course will cover...
Hot Work (Shipyard)
This online course presents an overview of safe work practices when performing hot work in a shipyard/maritime environment. The course will cover the responsibilities of both employers...
General & Maritime Silica Safety
This course is designed to assist employers and employees in understanding the standards set forth in 29CFR1910 which covers the steps to working safely where exposure...
